Miele FN 28262 edt/cs Скачать руководство пользователя

Страница: 26 / 64

Further settings

Safety lock



The safety lock prevents the appliance
being switched off without your
knowledge, for example by children.

Switching on the safety lock



Touch the SuperFreeze sensor for
approx. 5 seconds.

The MENU symbol will appear in the
display and



will start flashing.



Touch the
SuperFreeze sensor again.





will appear in the display.

– To activate the safety lock confirm





by touching the SuperFreeze sensor

again.

– If you want to cancel the process

touch the On/Off sensor twice.

The safety lock symbol



will appear

in the display if it has been activated.



Touch the On/Off sensor to quit
settings mode.
Otherwise the appliance will switch to
normal operation after approximately
5 minutes.

Switching off the safety lock



Touch the SuperFreeze sensor for
approx. 5 seconds.

The MENU symbol will appear in the
display and



will start flashing.



Touch the
SuperFreeze sensor again.





will appear in the display.

– To deactivate the safety lock confirm





by touching the SuperFreeze

sensor again.

– If you want to cancel the process

touch the On/Off sensor twice.

The safety lock symbol



in the

display will go out if it has been
deactivated.



Touch the On/Off sensor to quit
settings mode.
Otherwise the appliance will switch to
normal operation after approximately
5 minutes.

Содержание FN 28262 edt/cs

































































Результаты поиска

Содержание FN 28262 edt/cs

Отзывы:

Похожие инструкции для FN 28262 edt/cs

Бренды по названию

Популярные бренды

Miele FN 28262 edt/cs, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание FN 28262 edt/cs

Отзывы:

Похожие инструкции для FN 28262 edt/cs

Бренды по названию

Популярные бренды