manualshive.com logo in svg

Miele F 2671 Vi, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele F 2671 Vi Скачать руководство пользователя страница 29

Installation

*INSTALLATION*

29

With the help of several people as
required, carefully lift the appliance
from the pallet, starting with the back
of the appliance.

Risk of damaging the floor.

Moving the refrigeration appliance
may damage your floor.
Move the appliance carefully on
floors that are sensitive to
scratching.

As soon as you have set the appliance
upright, you can move it using the
rollers on the underside of the
appliance.

Preparing the installation niche

Danger of damage and injury

due to the appliance tipping over!
This refrigeration appliance is very
heavy and can tip forwards when the
door is open.
The housing unit must be secured to
the wall behind it and/or above it
with several screws. Only this will
prevent the appliance from tipping
over after being installed.
In addition, use the anti-tip brackets
provided to secure the housing unit.

The parts required for installation of
the appliance are supplied with the
appliance. The plastic bags supplied
are marked with letters for easy
identification.

Please take note of these letters
during the individual assembly steps
and use the applicable plastic bag
with the required installation material.

Содержание F 2671 Vi

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды