manualshive.com logo in svg

Miele F 2671 Vi, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele F 2671 Vi Скачать руководство пользователя страница 28

Installation

*INSTALLATION*

28

Before installation

Before installation, remove any
accessories from the back of the
appliance.

Check the appliance for transport
damage.

Do not install a damaged appliance.

Check that all parts at the back of the
appliance are unhindered.

To protect the floor when installing
the appliance, secure an off-cut of
flooring (e.g. linoleum) or similar
material to the floor in front of the
installation area.

Do 

not

 remove the installation aids 

from the appliance door. These will
be required later when the appliance
is installed in the niche.

Danger of damage and injury

due to the appliance tipping over!
Note that once you unscrew the
brackets that fix the refrigeration
appliance to the pallet, the appliance
will no longer be secured.
Due to the size and weight of the
appliance, installation 

must be

carried out by two people

.

2

Unscrew the fixing brackets 

.

Содержание F 2671 Vi

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды