manualshive.com logo in svg

Miele F 2462 SF, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele F 2462 SF Скачать руководство пользователя страница 28

Installation

*INSTALLATION*

28

Preparing the installation niche

Risk of damage and injury due to

the refrigeration appliance tipping
over.
This refrigeration appliance is very
heavy and can tip forwards when the
doors are open.
The installation niche must be se-
cured to the wall behind it and/or
above it with several screws. Only
this will prevent the refrigeration ap-
pliance from tipping over after being
installed.
In addition, use the provided anti-tip
brackets to secure the installation
niche.

The parts required for installation are
supplied with the refrigeration appli-
ance. The plastic bags supplied are
marked with letters for easy identifica-
tion.

When performing the individual as-
sembly steps, observe the letters
specified and use the matching plas-
tic bag with the required installation
equipment.

The anti-tip brackets prevent the refrig-
eration appliance from tipping.

The anti-tip brackets are also used to fix
the installation niche securely to the
surrounding walls.

2

Use 2 anti-tip brackets 

 for each in-

dividual appliance or 4 anti-tip brack-
ets for each (side-by-side) combina-
tion of 2 appliances.

Position the anti-tip brackets 

 on

the left and right of the niche.

Depending on the subsequent adjust-
ment of the feet, the anti-tip brackets
are positioned 84"-85 3/16" (2,134–
2,164 mm) from the floor of the niche.

Содержание F 2462 SF





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды