,
Repairs should only be carried out by an authorized technician in
accordance with local and national safety regulations. Unauthorized repairs
could cause injury or appliance damage.
What if the drawer does not heat?
Possible fault
Solution
There is no power to the warming
drawer.
Insert the plug into the outlet.
The circuit breaker has tripped.
Reset the circuit breaker. If in doubt
contact an electrician.
What if the food is not warm enough?
Adjust the temperature setting. Check that the vents have not been blocked by
large plates or dishes.
What if the food or dishes are too hot?
Check the temperature setting and make sure the food is not too close to the
heating element.
What if the dishes are not warm enough?
Possible fault
Solution
The wrong temperature was selected.
Check the temperature setting.
The vents were blocked by dishes.
Reload the dishes.
The dishes need more time to warm.
See "Warming times".
A noise is heard during use.
This is not a fault. This is the circulation fan which distributes the heated air. The
fan works in intervals during the "
2
Food - warm and hold" mode.
Frequently asked questions
21
Содержание ESW4082-14
