
Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
143
Electrical connection
Danger of injury!
Installation, repairs and other work
by unqualified persons could be
dangerous. Miele cannot be held
liable for unauthorised work.
Ensure power is not supplied to the
appliance until after installation or
repair work has been carried out. All
electrical work should be undertaken
by a suitably qualified and
competent person in strict
accordance with current national and
local safety and building code
regulations.
When switched off there must be an all-
pole contact gap of 3 mm in the isolator
switch (including switch, circuit
breakers and relays).
Voltage, rated load and fuse rating
are given on the data plate situated at
the front of the oven compartment.
Please ensure these match the
household electricity supply.
If the connection cable is damaged, it
must be replaced by a Miele approved
service technician in order to avoid a
hazard.
Connection of this appliance must
comply with national and local safety
regulations.
Connection to a switched socket is
recommended as this provides easier
access in the case of a service call.
For extra safety, it is advisable to
protect the appliance with a suitable
residual current device (RCD) with a trip
current of 30 mA.
If the switch is not accessible after
installation, an additional means of
disconnection must be provided for all
poles. The means of disconnection
must be incorporated in the fixed wiring
in accordance with the wiring rules.
Содержание DO 7860
Страница 140: ...Installation I N S T A L L A T I O N 140 Side view ...
Страница 156: ...M Nr 11 209 040 01 en AU NZ DO 7860 ...