Parameters
38
Displaying and changing
parameters
You can change the portion size for all
drinks.
For coffee drinks, you can also set the
amount of coffee, the brewing
temperature and pre-brewing for each
coffee drink individually.
Touch the
sensor.
Select a drink and confirm with
OK
.
The parameters that you can change for
this drink will be displayed.
If you have selected a coffee drink, the
current settings for
Amount of coffee
,
Brew temperature
and
Pre-brewing
will be
displayed.
The
Portion size
option is displayed. If
you select
Portion size
and confirm
with
OK
, drink preparation will begin
immediately.
Select the required parameters.
Change the setting as required and
confirm with
OK
.
The setting is now saved.
Portion size
The flavour of the coffee produced
depends not only on the type of coffee,
but also on the amount of water used.
You can programme the amount of
water for all drinks (except coffee pot)
to suit the size of your cups and/or the
type of coffee you are using, for
example.
For coffee drinks that use milk you can
also set the amount of milk or milk froth
to be dispensed with these drinks.
A maximum portion size can be
programmed for each type of drink. The
coffee machine halts preparation of the
coffee once this portion size has been
reached. The maximum possible
portion size is then saved by the
appliance for this type of drink.
If the water container becomes empty
during the preparation of a drink, the
programming of the portion size will
be cancelled. The portion size will
not
be saved.
The changed portion size is always
saved in the current profile. The name
of the current profile is shown in the top
left of the display.
Changing the portion size
Place a cup or glass under the central
spout.
Select
Portion size
and confirm with
OK
.
The desired drink will be made and
Save
will appear in the display.
When the cup is filled up to the level
you want, touch
OK
.
If you want to change the portion size
for coffee specialities made with milk,
the ingredients which make up the drink
will be saved one after the other while
the drink is being made.
When the quantity for each ingredient
reaches the level you want, touch
OK
.
The programmed combination of
ingredients and portion sizes will now
be dispensed every time that particular
drink is selected.
Содержание CVA 744C
