manualshive.com logo in svg

Miele CVA 4070 EN-CA, Техническая информация

Поделиться
Скачать
Miele CVA 4070 EN-CA Скачать руководство пользователя страница 24

 
 

Technical Information

 

 

 

CVA4070 / CVA4075 Coffee Systems

 

3.3.4   

Clock Display On/Off 

The clock can be displayed or turned off. 

 

•

  If the display is turned on, the time of day is displayed when the 

machine is turned off. 

 

•

  If the option is set off, the display turns off after 60 seconds. 

 

1.   Select "Clock display". The selected display is highlighted. 
2.   Select "OK" to save the selection. 

 
 

3.4   

Filling the Water Tank  

The beans and the water quality is important for a good espresso or 
coffee. The water tank must be washed and filled with fresh cold drinking 
water before each day of use. The unit displays a reminder when turned 
on.  

 

Note: 

Never add hot water or any other liquids except cold water to the water 
tank. 

 

Note: 

Do not use mineral water. Mineral water leads to heavy calcium built-up 
in the machine that can damage the unit.

 

 
 

 

 

 

 

 

 

      

 

  Figure 

3-1: 

CVA4070 Pull Door Open. 

 

1.   Open the appliance door by holding the grip next to the hot water 

spout and pulling the door towards you.  

 
 
 
 
 

24 

 

Содержание CVA 4070 EN-CA




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды