Miele CS 1327 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 40

Miele CS 1327 Скачать руководство пользователя страница 18

Cleaning and care

18



Danger of burning due to hot

surfaces.
The surfaces will be hot after cook-
ing.
Switch the Tepan Yaki off.
Allow the surfaces to cool down be-
fore cleaning the Tepan Yaki.



Risk of damage due to moisture

ingress.
The steam from a steam cleaner
could reach live electrical compo-
nents and cause a short circuit.
Do not use a steam cleaner to clean
the Tepan Yaki.

All surfaces could become discol-
ored or damaged if unsuitable clean-
ing agents are used. All surfaces are
susceptible to scratching.
Remove any residual cleaning agent
immediately.
Do not clean with any abrasive
cleaning agents or sharp pointed ob-
jects.

Allow the ProLine element to cool
down before cleaning.



Clean the ProLine element and ac-
cessories after each use.



Dry the ProLine element thoroughly
after cleaning it with water to avoid
limescale residue.

Unsuitable cleaning agents

To avoid damaging the surfaces of the
appliance, do not use:

- cleaning agents containing soda, al-

kalines, ammonia, acids, or chlorides,

- cleaning agents containing lime scale

remover

- stain or rust removers

- abrasive cleaning agents, such as

scouring powder, scouring liquid, or
pumice stones

- cleaning agents containing solvents

- dishwasher cleaner

- grill and oven sprays

- glass cleaners

- hard, abrasive brushes or sponges

(e.g., pot scourers), or sponges which
have been previously used and still
contain abrasive cleaning agents

- eraser sponges

«
...
16
17
18
19
20
...
»

Содержание CS 1327









































Отзывы:

Нет отзывов