manualshive.com logo in svg

Miele CS 1011-1, Инструкции по эксплуатации и монтажу, Страница: 22 / 68

Поделиться
Скачать
Miele CS 1011-1 Скачать руководство пользователя страница 22

Before using for the first time

22

Please stick the extra data plate for
the appliance supplied with this doc-
umentation in the space provided in
the “After sales service” section of
this booklet.

Remove any protective wrapping and
stickers.

Cleaning the ProLine element
for the first time

Clean all removable parts of the burn-
ers with a solution of warm water and
a small amount of washing-up liquid
applied with a soft sponge. Dry all
parts thoroughly after cleaning and
then reassemble the burners (see
“Cleaning and care”).

Clean the stainless steel trough with a
damp cloth, and then wipe dry.

Switching on the ProLine ele-
ment for the first time

The metal components have a protect-
ive coating which when heated for the
first time will give off a slight smell and
possibly some vapours.

The smell and any vapours given off do
not indicate a faulty connection or ap-
pliance and they are not hazardous to
health.

Содержание CS 1011-1





































































Отзывы:

Нет отзывов