Miele CM 6160, Руководство по эксплуатации

Страница: 47 / 92

Settings
47
Barista mode
This Performance mode is optimised for
perfect coffee enjoyment. Coffee drinks
can be prepared without any delay as
the coffee machine remains heated to
the brewing temperature. This mode
consumes more energy than Eco mode.
Latte mode
This mode is optimised for preparing
drinks containing milk. Milk-based
drinks can be prepared much faster.
This mode consumes more energy than
Eco mode and Barista mode
Party mode
This Performance mode is designed for
infrequent , intensive use of the coffee
machine, e.g. for family parties.
After intensive use, clean the coffee
machine, and particularly the milk
pipework, thoroughly. If necessary,
descale the machine and degrease
the brew unit.
Please note the following information
about Party mode:
- The pipework is rinsed much less
frequently or not at all.
- Any messages on the maintenance
status, or maintenance prompts, are
suppressed and delayed until the
next time the machine is switched
on.
- The Switch off after timer is
deactivated. The coffee machine
switches off 6 hours after the last
sensor has been touched.
- Cup lighting on the central spout is
switched on permanently at the
maximum brightness level for as long
as the coffee machine is switched on.
Water hardness
Programme the coffee machine to the
water hardness level of your area so
that it functions correctly and does not
get damaged.
Contact your local water supplier to find
out your local water hardness range if
necessary.
If you are using bottled drinking water,
e.g. mineral water, select settings
according to the calcium content. The
calcium content is given on the label of
the bottle in mg/l Ca
2+
or ppm (mg
Ca
2+
/l).
Do not use carbonated water.
The water hardness is preset at the
factory to 21° dH (3.8 mmol/l).
Water hardness Calcium
content
mg/l Ca
2+
or
ppm (mg Ca
2+
/l)
Setting
°dH mmol/l
1 0.2 7 1
2 0.4 14 2
3 0.5 21 3
4 0.7 29 4
5 0.9 36 5
6 1.1 43 6
7 1.3 50 7
8 1.4 57 8
9 1.6 64 9