Grinder setting
40
When the beans are ground correctly,
the coffee or espresso will flow evenly
into the cup with a good crema.
The crema should have an even
hazelnut brown colour.
The grinder setting you select will be
used for all coffee drinks.
There are various ways to tell whether
the coffee grinder is set correctly.
The coffee has been
too coarsely
ground if:
- espresso or coffee flows into the cup
too quickly,
- the crema is very pale and uneven.
Set a finer grinder setting.
The coffee has been
too finely
ground
if:
- espresso or coffee flows into the cup
very slowly,
- the crema is dark brown.
Set a coarser grinder setting.
Only adjust the grinder one setting at
a time.
Start making a drink to grind beans
again. Adjust the grinder setting one
setting at a time again.
Adjusting the grinder setting
Open the appliance door.
Push the slide control a maximum of
one setting to the left (for finer
grinding) or to the right (for coarser
grinding).
Close the appliance door.
Empty the drip tray
and
the waste
container.
Make one cup of coffee.
Then you can adjust the grinder setting
again.
The altered grinder setting will not
take effect until after the second
coffee has been dispensed.
Содержание CM 6160
Страница 88: ...Appliance dimensions INSTALLATION 88 ...
Страница 90: ......
Страница 92: ...M Nr 11 619 020 00 en AU NZ CM 6160 CM 6360 CM 6560 ...