Operation
54
Selecting a program
Program selection
buttons
Select a programme using program selection buttons
,
,
or
.
Program list
Press the
button and
use the
and
arrow buttons to highlight a program and confirm
your selection with
OK
.
Normal plus
Temperature
Duration
h
1:30
75 °C
The LED in the button selected lights up and the relevant program ap-
pears in the display. The LED in the
Start/Stop
button also starts to
flash.
Another program can be selected at any time before a program has
started. Once it has started, program selection is locked.
The different programs and their uses are described in “Program
charts” at the end of these operating instructions.
Always select the program depending on the type of wash items and
degree and type of soiling, or on infection prevention issues.
Starting a program
Close the door.
When the door is closed, the LED in the
button will light up.
Press the
Start/Stop
button.
The LED in the
Start/Stop
button will light up constantly and the
LED in the
button will go out.
Starting a pro-
gram using delay
start
The start of a program can be delayed (to benefit from economy rates
of electricity, for example, or to clean the wash cabinet before it is
used the next day). Starting from the programmed time, a delay start
time between 1 minute and 24 hours can be selected in one-minute
increments (see “Settings
/Time of day”).
Delay start must be switched on (see “Settings
/Delay start”).
If soiling is left to dry on the wash items for a long time, the repro-
cessing result can be adversely affected. There is also a risk of cor-
rosion for stainless steel wash items.
