Program settings
100
Program blocks
The wash block sequence is predefined and is the same as in the
program chart (see “Program chart”).
-
Pre-rinse 1
to
3
Pre-washing removes coarse soiling and foam-building substances.
-
Main wash 1
and
2
Depending on the wash load, cleaning generally occurs at tempera-
tures between 104 - 140°F (50°C and 85°C) with the addition of an
appropriate cleaning detergents.
-
Interim rinse 1
to
4
In the interim rinse stages the process chemicals from the previous
wash blocks are rinsed off and neutralized where necessary by the
addition of neutralizing agents.
-
Final rinse 1
to
2
To avoid deposits on the wash load, demineralized (DI) water
should preferably be used if available for the final rinse.
-
Drying
Adequate drying reduces residual moisture on the load.
