Settings
48
–
Activate
This setting is only visible if
Miele@home is deactivated. The WiFi
function is reactivated.
–
Deactivate
This setting is only visible if
Miele@home is activated.
Miele@home remains set up, the WiFi
function is switched off.
–
Connection status
This setting is only visible if
Miele@home is activated. The display
shows information such as the WiFi
reception quality, network name and
IP address.
–
Set up again
This setting is only visible if a WiFi
network has already been set up.
Reset the network settings and
immediately set up a new network
connection.
–
Reset
This setting is only visible if a WiFi
network has already been set up. The
WiFi function is deactivated and the
WiFi connection will be reset to the
factory default setting. You must set
up a new WiFi connection to be able
to use Miele@home.
–
Set up
This setting is only visible if there is
no existing WiFi connection. You
must set up a new WiFi connection to
be able to use Miele@home.
Remote control
If you have installed the Miele@mobile
app on your mobile device, have
access to the Miele@home system and
have activated the remote control
function (
On
), you can use the
MobileStart function to retrieve
information on oven cooking
programmes that are in progress or to
end a programme in progress.
Activating MobileStart
Select the
sensor control to
activate MobileStart.
The
sensor control lights up. You
can operate your oven remotely with the
Miele@mobile app.
Directly operating the oven via the
touch display takes priority over
operating it via the remote control
function on the app.
You can use MobileStart as long as
the
sensor control is lit up.
Содержание 11 196 580
Страница 111: ...Installation I N S T A L L A T I O N 111 Side view A 47 mm ...
Страница 132: ...M Nr 11 196 580 02 en GB H 7840 BM ...
