manualshive.com logo in svg

Miele professional PW 413 SES, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele professional PW 413 SES Скачать руководство пользователя страница 49

Installation and connection

49

Removing the transport safety devices

The 2 transport safety devices at the front are each secured with
3 screws. The transport safety device at the back is secured with
4 screws. The transport safety devices must only be removed when
the machine is in place, before it is commissioned.

Remove the front and back panels:

Unscrew the screws at the bottom of the front panel and remove
the panel.

Unscrew the screws at the bottom of the back panel and remove
the panel.

Loosen the hexagonal screws to remove the transport safety
devices.

Retain the transport safety devices. They need to be refitted should
the machine ever need to be moved again.

Water connection

Water pressure (flow pressure) of a minimum 100 kPa (1 bar) /
maximum 1000 kPa (10 bar) is required to guarantee problem-free
programme operation.

The machine must be connected to the water supply using the inlet
hoses provided.

New hose-sets supplied with the appliance are to be used. Old hose-
set should not be re-used.

Useful tip: 

The hot water supply must not exceed a maximum

temperature of 70 °C.

Содержание PW 413 SES











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды