Midwest Industries, Inc.
Ida Grove, IA 51445 800-859-3028 0004549
Page 13 of 23 shorestation.com 12-3-19
Loading Your Boat into the Lift
1
–
Lower the lift
Before loading your boat into
the lift, be sure the platform has
been lowered into the water
deep enough to ensure the boat
will float over the top of the
cradle and support bunks. It is a
good idea to use tape to mark
the lift cables. This mark should
be placed to refer to the water
line when the platform is at
sufficient depth. This reference
mark is helpful if your lift is in
an area where the tide
changes the water level.
If you are approaching
the lift in the boat, lower
the lift using the wireless
remote to your reference
mark.
DO NOT ATTEMPT TO LOAD OR
UNLOAD YOUR BOAT WHEN LARGE
WAVES, WAKES, OR HIGH WINDS ARE
PRESENT. DOING SO COULD CAUSE
DAMAGE TO YOUR LIFT AND/OR
BOAT.
WARNING
