Midtronics DCA-8000P, Краткое руководство пользователя

Страница: 1 / 4

Page
1
Quick Reference Guide
Aug. 2021
167-001001EN-B
IMPORTANT: Always leave the DCA-8000 plugged-
in when not in use to allow the tool to automatically
check for and perform any available software updates.
Charging Cables
1. Insert the communication cable
until the connector locks into
place.
2. For strain relief, pre-twist each
quick connector counter clock-
wise, before inserting and rotat-
ing clockwise 180° onto each
Locking Post on the back of the
charger.
3. The connection process is complete when all three cables
are secured to the charger.
Locking Power Cord
1. Install power cord.
2. If removal is necessary, pull back
on the red tab on the side of the
connector to release/remove the
power cord from the charger’s
power socket.
Wireless Barcode Scanner Cable
1. Insert the RJ50 connector into the bottom of the scanner
base until it clicks into place.
2. If necessary, using a flat blade screwdriver, pry off the
plastic cover over the DB9 connection on the back of the
charger.
3. Use the thumb screws on the DB9 connector to secure the
cable from the dock to the charger.
NOTE: The barcode scanner base is magnetic and can
be placed anywhere on top of the DCA charger.
Initial Setup
1. Upon initial power-up, the Language Settings screen is dis-
played. If necessary, adjust the language settings for your
dealership, then tap Next to continue.
System
Language
Select the Controller default language
displayed on the screen.
Test Result
Language
Select the Controller default language for
all displayed tests and test results.
Email
Language
Select the default standard language for
the analyzer to use for all tests and results
sent via email.
Print
Language
Select the default standard language for
the analyzer to use for all tests and results
printed using a networked printer.
2. A Consent To Collect Data screen is displayed. Read the
terms for collecting data, tap the Consent check box and
then tap Next to continue.
Pull back to release
For an online step-by-step guide through the tool’s initial setup, please scan the QR code on Page 4:
DCA-8000P