8
d.
Reset key: Pressing the MIDI/SELECT button and the Reset key
will send out a message to return all external MIDI instruments to
their default setting as well.
e.
. Control Change data entry by Numeric keypad: MIDIPLUS
allows you to use the numeric keys to specify your Control Change
DATA parameter instead of data entry slide. By pressing
MIDI/SELECT button and CC data key & then the required number
and finally the Enter key to finish. For example, if you want to
make Control Change 7 as value 123. 1) Press MIDI/SELECT
button; 2) press CC No.; 3) choose 7 on numeric keypad; 4) press
enter key to specify Control Change as 7; 5) press CC data key; 6)
press number key 1, 2, and 3; 7) press enter key to specify value
123 then press MIDI/SELECT button to finish this action.
Please
note: after you press enter key the LED display will show “---“ to indicate
that you pressed enter key and will not disappear until you press
MIDI/SELECT button to finish your choice. After you press cancel key the
LED display will show blank to indicate that you pressed cancel key and will
not disappear util you press MIDI/SELECT button to finish your choice.
f.
Program key: Pressing MIDI/SELECT button and the Program key
& then numeric keys then enter key, you can select any patch
number between 1 to 128. For example, if you want to change voice
to 67 (TenoSax). Pressing MIDI/SELECT button and 67 on
numeric keys then enter key and MIDI/SELECT button again to
finish this action.
Please note: after you press enter key the LED display
will show “---“ to indicate that you pressed enter key and will not disappear
until you press MIDI/SELECT button to finish your choice. After you press