midiplus BK492, Руководство пользователя

Страница: 6 / 14

MIDIPLUS Co, Ltd. http://www.midiplus.com.tw
4
1.3.1 Play with your Application Software
Generally, in PC or Mac, most MIDI software will have a MIDI port
configuration or settings, sometimes it called "MIDI Devices" or "MIDI Setup".
You can choose and enable your MIDI input and output devices in it.
If the BK492 driver is properly installed, and there is not other MIDI device
connected, the MIDI In port of BK492 In-1 (or "Port 1"on the Mac) will be
selected as the first midi input, while the MIDI Out port of BK492 Out-1 (or
Port 1) will be selected as the first midi output.
If the MIDI software runs, and the MIDI-In and Out port in BK492 are selected,
the MIDI message will be received when playing the BK492 keyboard. Also,
the soft can send the midi message out to other device through the BK492
"USB"MIDI OUT. You can connect this USB MIDI OUT port with the other
sound module or virtual instrument.
1.4 MIDI Connection
MIDI connector is a standard 5-pin DIN connector which is used to connect the
BK492 to sound module or virtual instrument interface" with a MIDI cable.
If you need to transmit MIDI data from your keyboard to other professional
MIDI instruments, please purchase a standard MIDI cable and use it to connect
the Keyboard or USB MIDI OUT jack in BK492 rear panel labeled "Keyboard
"or "USB "to the MIDI IN jack of the other instrument.
1.5 Power supply
Power switch has two options can be " USB" or "Battery".
Connect an USB cable from your computer to the BK492. The unit will be
powered by the computer USB.
Alternatively, if you do not want to use a computer for power, you can also use 6
AA type batteries.