Midian CAD-POCSAG, Руководство пользователя

Страница: 5 / 16

PRODUCT PROGRAMMING
Modem Parameters:
Baud Rate:
Select the baud rate of the POCSAG pagers, either 512, 1200 or 2400 bps.
COR Polarity:
This should match the active COR polarity of the radio.
Data Polarity: This polarity is dependent upon the radio and can only be determined by experimentation.
Key-Up Delay: This sets the delay from when the radio starts to transmit until the CAD-POCSAG encodes the
POCSAG sequence.
COR Delay: This sets the time that the channel must be inactive before the unit will attempt to send a page.
Transmit Hold Up: This is a length of time after the POCSAG has been encoded that the transmitter will remain
keyed.
Force Alpha/Numeric Translation: Check this box if the pagers are not capable of 7-bit and 4-bit decoding. If
checked the unit will send each message as 7-bit encoding. If unchecked it will send numeric messages as 4-bit
encoding.