Midian 24DME4H109, Инструкция по установке и эксплуатации

Страница: 9 / 20

Levelling Your Appliance
Install Anti-title Bracket
Warning:
Figure 1
Cabinet side
50
mm
50
mm
Figure 2
Figure 3
Fitting the safety chain and hook
To prevent the cooker from tipping forward, two lengths of chain MUST BE fixed to the back of
the cooker, which should be secured to the hooks provided at all times.
The hooks should be secured to the wall at the rear of the cooker. The chains should
always
be attached to the hooks when the cooker is in position against the wall.
Fix the hooks into the wall immediately behind the cooker on both sides.
Secure the chain to the hook before using or cleaning the oven.
9
In order to prevent tipping of the cooker, the anti-tilt bracket must be installed
with cooker. To install Anti-tilt bracket, use screwdriver to mount the anti-tilt bracket (1)
with screws (2) to the ground, as shows in Figure 3.
Take out the 4 cooker feet from oven cavity, which was packed together with baking rack, and
then screw them into the plinth in lower part of cooker. These feet level off the oven when
necessary. The height of the cooker can be adjusted by means of adjustable feet in the plinth.
Adjust the feet by tilting the cooker from the side. Then install the product into position. It is
essential that the cooker is standing level before installation.