Midea MI60S, Инструкция по эксплуатации

Страница: 25 / 28

26
9.7 Connecting the hob to the mains power supply
This hob must be connected to the mains power supply only by a suitably qualified person.
Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate
3. The power supply cable sections can withstand the load specified on the rating plate.
To connect the hob to the mains power supply, do not use adapters, reducers, or branching
devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is suitable without alterations.
Any alterations must only be made by a qualified electrician.

If the total number of heating unit of the appliance you choose is not less than 4, the appliance can
be
connected directly to the mains by single -phase electric connection, as shown below.
Yellow / Green
Black
Brown
Blue
380-415V~
220-240V~
220-240V~
1
2
3
4
5
N1
L1
L2
1
2
3
4
5
N2
Yellow / Green
Black
Brown
Blue
220-240V~
1
2
3
4
5
L1
L2
N1
N2
1
2
3
4
5
220-240V~
25A~