Midea MI60S, Инструкция по эксплуатации

Страница: 12 / 28

13
3.4.4 Keep Warm
The product have 3 levels of keep warm function.
Activate the Keep warm function
Touching the heating zone selection control.
Touching the keep warm control ,the zone indicator show
“ ”,
this means choosing the heating level for warming up
and keeping 42°C with
2L of water
.
Touching the keep warm control
again
,the zone indicator
show “ ” ,
this means choosing the heating level for
warming up and keeping 74°C with
2L of water
.
If the zone is already hot
（
letter “H” visible on
display
）
,you can also use this heating lever for keeping
warm of 74°C with
2L of water after finishing cooking
.
Touching the keep warm control
for the third time
, the
zone indicator show “ ” ,
this means choosing the
heating level for keeping 94°C with
2L of water after
finishing cooking
.
Cancel the keep warm function
Touching the heating zone selection control that you wish to
cancel the keep warm function
Touching the slider control, then the cooking zone will revert to
the level you select.
Note
：
• This function may be used on all cooking zones at the same time.
• Be sure to use a lid, as this could affect the final result.
• Better not use cast iron cookware.
3.4.5 Flexible Area
• This area can be used as a single zone or as two different zones, accordingly to the cooking needs
anytime.
• Flexible area is made of two independent inductors that can be controlled separately. When working as
a single zone, a cookware is moved from one zone to the other one within the flexible area keeping the
same power level of the zone where the cookware originally was placed, and the part that is not covered
by cookware is automatically switched off.
• Important
：
Make sure to place the cookwares centered on the single cooking zone. In case of big
pot, oval, rectangular and elongated pans make sure to place the pans centered on the cooking zone
covering both cross.
1 times 2 times 3 times