10
Using your microwave
Cooking in your microwave
1
Press
Cook Time
, then use the number pad to enter the cooking time that you want.
•
Note:
For example, to enter 3 minutes and 15 seconds, press
3
,
1
, and then
5
.
2
Press
Power Level
, then enter the power level that you want (0-10).
•
LEVEL
10
9
8
7
6
5
4
3
2
1
0
Power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
Display
P-H1
P-90
P-80
P-70
P-60
P-50
P-40
P-30
P-20
P-10
P-0
•
•
Notes:
• You can check the power level during cooking by pressing
Power Level
. To change it, enter a new power level (0–10).
• If “P-0” is selected, the fan turns on but microwave cooking power will be at 0%. You can use this level to remove an odor in your
microwave.
3
Press
Start
to begin heating.
OR
For two-stage cooking, repeat steps 1-2 to program the second stage.
•
Notes on two-stage cooking:
• Two-stage cooking lets you program two cook times and power levels at the same time.
• The first time/power level entered is the first stage and the second time/power level entered is the second stage.
• Two stage cooking does not show up on the display, but the total cook time is displayed.
• (Please provide examples of why/when a user would use two-stage cooking)
Setting the clock
1
In standby mode, press and hold *
Clock
for three seconds. The display will flash.
2
Use the number pad to enter the current time (1:00–12:59), then press
Start
to confirm the setting. If your
microwave beeps three times, the numbers entered are valid.
Using the kitchen timer
1
In standby mode, press
Timer
On/Off
. The display shows “: 0” and “TIMER”.
2
Use the number pad to enter the time (the maximum time is 99 minutes and 99 seconds), then press
Start
to
start the timer. When the time reaches 0, your microwave beeps once.
Turning sound on and off
1
Press
Sound
to turn off the beep sounds when panel buttons are touched. “OFF 1” appears on the display
momentarily.
2
Press
Sound
again to turn off all beep sounds including end of cycle and timer alerts. “OFF 2” appears on the
display momentarily.
3
Press
Sound
again to turn on all sounds. “on” appears on the display momentarily.
Cooking quickly
•
Press
+30 Sec.
to instantly cook something at 100% power for 30 seconds.
•
To increase the time in 30 second increments (except Auto Cook), press
+30 Sec.
repeatedly.
•
Press the
1
,
2
, or
3
(express number) keys to immediately start fast cooking for the corresponding number of
minutes at 100% power.
Cooking complete reminders
At the end of the cooking cycle, your microwave stops running and beeps, the display will show "End" until you
remove the food or press
Stop
. If you do not remove the food within three minutes, your microwave beeps twice to
remind you to remove the food. Your microwave repeats this reminder every three minutes.
Содержание EM044K6BC-P3
Страница 19: ...V1 ENGLISH 22 0308 Midea...
