Chapter 3: Using the Web Interface
135
2.
Select "Execute an action group" from the Action list.
3.
To select any action(s), select them one by one from the Available Actions list.
•
To select all available actions, click Select All.
4.
To remove any action(s) from the Selected Actions field, click that action's
.
•
To remove all actions, click Deselect All.
5.
Click Create.
Log an Event Message
To create a log event message action:
1.
Choose Device Settings > Event Rules >
.
2.
Select "Log event message" from the Action list.
The option "Log event message" records the selected events in the internal log.
The default log message generated for each type of event is available in the section titled
Default Log Messages
(on page
3.
Click Create.
Push Out Sensor Readings
You can configure the PDU to push sensor log to a remote server after a certain event occurs, including logs of internal
sensors, environmental sensors and dry contacts.
