MC300 User Manual V2.0
http://www.mictrack.com
7
Example : SLEEP0000 1
Reply
:
SET OK
Disable Sleep command : SLEEP+PSpace+ 0
Example : SLEEP0000 0
Reply
:
SET OK
Note :
1 is mean the sleep time, the wide is 1-720 , the unit is “minute” , Tracker will close
GPS/GSM/POWER in sleep mode for save power, once shake, tracker will work again.
8.16 Remove Alarm
Tracker will send remove alarm message to 3 authorized number and send remove alarm
data to platform if tracker was removed .
8.17 Set Access Point Name(APN)
Command1:803+user pspace+APN
Example: 8030000 CMNET
Command2:
803+user pspace+APN+space+APN user name+space+APN password
Example: 8030000 INTERNET INTERNET INTERNET
Reply:SET OK
8.18 Set server IP address and Port
Command:804+user pspace+IP+space+Port
Example: 8040000 192.168.1.1 2014
Reply:SET OK
8.19 Set Data upload interval time
Command:805+user pspace+X
Example: 8050000 30
Reply:SET OK
Note :X is mean interval time, the unit is seconds
,
the wide is
【
10,18000
】
,
9. Special Command
Reset Command: RESET
Read Configuration Command: RCONF
Tips:
How to setup APN:
https://www.mictrack.com/apn-settings-for-mictrack-gps-trackers
How to use Mictrack Server:
https://www.mictrack.com/how-to-use-mictrack-server
Global Frequency bands check:
https://www.mictrack.com/4g-lte-frequency-bands-list
If you have any questions please do not hesitate to contact us [email protected].