MICROTRONIX DX-4400 Series, Руководство пользователя

Страница: 21 / 125

DX-4400
– 3G-SDI Text & Graphics Overlay Inserter – User Manual
Page 21 of 125
Figure 6: DX-4400 Web UI Home Page
3.6.3.2 Default Static Network IP Address
The factory default Ethernet secondary static Network IP address is 10.1.1.230. This assignment is stored in the
ethenv (Ethernet environment) system file, namely /etc/dx4400/ethenv . This file can be edited using the Web UI
under the System Configuration using the Edit System Files menu item. (See section 5.7.6 System Configuration
– Edit System Files Page
for more information.)
Note : This feature is only available in software version 1.5.0 and beyond.
3.6.3.3 DHCP Assignment of Network IP Address
When connected to an Ethernet Network, the DX-4400 unit uses DHCP to acquire an IP address from the
Network. The unit self identifies to the DHCP Server as DX-4400_00-60-80-NN-NN-NN where NN represents the
digits of the MAC address that can be found on the bottom of the unit.
Using the defined name, check with your Network Administrator who will be able to supply you with the IP
address assigned by the Network DHCP Server. Alternatively, by using a Ping Command from the Command
Prompt of a PC, it should be possible to get a response from the DX-4400 unit by typing:
ping DX-4400_<mac addr>
where <mac addr> is the address of the unit. For example if the nameplate label on the DX-4400 shows MAC
Address of 00:60:80:40:00:02, then the Ping Command would be
:
ping DX-4400_00-60-80-40-00-02