MICROTRONIX DX-2200 страница 19 Скачать руководство пользователя | Manualshive

Страница: 19 / 103

background image

DX-2200

– SD/HD-SDI Text & Graphics Inserter – User Manual

Page 19 of 103

Figure 9: DX-2200-TI Layer Order

The top layer in the mix is referred to as

Graphics Text Layer 1.

This layer displays up to 48 Fields that

support text and graphics. The optional Frame Counter displays on this layer. Text Fields on this layer are
configured using either the Text Overlay Serial Commands or the Graphics Overlay Serial Commands. The
Frame Counter is configured by the Frame Counter Serial Commands.

The next two layers are

Graphics Layer 2

and

Graphics Layer 3

. These layers each display up to 48 display

Graphic Fields that are controlled by the Graphic Overlay Serial Commands.

The 4

th

layer is the

SDI video

, and the 5

th

layer is the

Black Background.

Within  any  one  layer,  no  mixing  of  fields  takes  place.  If  two  fields  have  pixels  that  occupy  the  same
coordinates,  one  will overwrite the  other. When an update is performed  to render the fields on a  layer, the
fields are rendered in order of their field number. For  example, Field 4 will always be rendered after Field 3
and will overwrite any pixels of Field 3 if they are in the same location in the frame.

When graphic fields on different layers are placed at the same coordinates, they mix according to their
transparencies and the layer order. When a field is fully visible, no content that is on the layers below it will
be visible. When the field is partly or fully transparent, it mixes with the layers below according to their
transparencies.

4.8 SERIAL & MANUAL Control

The SD/HD-SDI Video Text Inserter has two methods of control: SERIAL Control using the RS232 port, and
MANUAL Control using the DIP switch and Toggle switch. SERIAL Control allows control full of the
capabilities of the DX-2200-TI, and MANUAL Control provides a subset of functions.

SERIAL Control is always active. In the factory default configuration the Toggle Switch and DIP switch are
active.

The functions of the DIP switch and Toggle switch can be reconfigured by SERIAL Control commands to
customize the Switcher so that the controls provide the set of functions required for a specific user
application. The modified configuration can be saved on board in the flash configuration memory.

4.8.1 SERIAL Mode of Operation

When SERIAL control is used, the DX-2200-TI is controlled via commands sent to the DB9 Serial Control
Port.

The serial COM port of the computer connected to the DX-2200-TI should be configured for: 115,200 baud,
1 stop bit, and no flow control.

4.8.1.1 USB 2.0 to RS-232 Serial Port Adapter

The DX-2200 product is supplied with a

USB 2.0 to DB9 RS-232 Serial Port Adapter Kit

(PN: 811-USB-

RS232 Kit) to connect the DB9F Serial Port to a USB 2.0 port of a PC or laptop. The Kit consists of a USB

«
...
17
18
19
20
21
...
»

Содержание DX-2200








































































































Отзывы:

Нет отзывов

Похожие инструкции для DX-2200

Бренд: D-Link Страницы: 14

Бренд: Omega Engineering Страницы: 3

COOPER POWER SERIES

Бренд: Eaton Страницы: 32

Бренд: Keithley Страницы: 452

Бренд: Kathrein Страницы: 41

Бренд: Magnetrol Страницы: 24

Бренд: Xenteq Страницы: 22

Бренд: Eaton Страницы: 2

Celabs Distribution Hub and Receiver

Бренд: Cable Electronics Страницы: 2

Бренд: Dahua Страницы: 17

Бренд: Lindy Страницы: 2

852-1411/000-001

Бренд: WAGO Страницы: 40

Бренд: hager Страницы: 2

Бренд: Hama Страницы: 32

FiberPlex 1004E

Бренд: Patton Страницы: 39

Бренд: FIBERROAD Страницы: 30

Бренд: Pakedge Device & Software Страницы: 8

Бренд: Black Box Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды