Microtronics myDatalogNANOamr, Руководство пользователя, Страница: 45 / 125

Chapter 9 User interfaces
Chapter 9 User interfaces
The configuration of the myDatalogNANOamr is carried out via the web interface on the myDataweb
server (see "User interface on the myDataweb-Server" on page 47), which your responsible sales
partner will provide to you.
9.1 User interface on the myDatalogNANOamr
9.1.1 Operating elements
The operating elements of the myDatalogNANOamr can still be operated when the housing is
closed.
Operating elements
1 Solenoid switch 2 Status LED
9.1.1.1 Solenoid switch
The MDN Magnet (206.803), that is available as an accessory, is required to operate the solenoid
switch. The solenoid switch can be used to initiate the ALOHA transmission mode or to instruct the
myDatalogNANOamr to immediately issue the error/status code.
Operation by the
user
Device response
Operation after releasing the solenoid
switch
Press briefly
(approx. one
second) Status LED illuminates Error/status code is issued (see "Status
LED" on page 46)
Press and hold for
five seconds Status LED flashes three times and
then remains on ALOHA transmission mode
Rev. 01 45