Microtronics myDatalogGauge 3G, Руководство пользователя

Страница: 150 / 158

Log entry Parameter
Description
Code Plain text Code Plain text
2430 Measurement OK 1 --- Indicates that the BLE Gauge assigned to
measurement channel 1, provided a valid
measurement value again after at least one
measurement failed.
2 --- Indicates that the BLE Gauge assigned to
measurement channel 2, provided a valid
measurement value again after at least one
measurement failed.
16.3 Evaluating the device log
16.3.1 Evaluating the device log on the myDatanet server
The last 300 log entries on the myDatanet server can be called up via the button shown below that is located
in the measurement device list. As the log entries are sent to the server in the transmission cycle in the same
way as the measurement data, only the log entries up to the last server connection are available.
The manual for the server ("myDatanet Server Manual " 805002) includes a detailed description of the
evaluation of the device log on the myDatanet server.
16.3.2 Evaluating the device log using DeviceConfig
The DeviceConfig program can be used to read all of the stored log entries, including those that have not yet
been transferred to the myDatanet server, directly from the myDatalogGauge 3G via the Bluetooth interface.
A more detailed description about the evaluation of the device log using DeviceConfig is included in the user
manual for the DeviceConfig ("myDatanetDeviceConfig Manual " 805004).
150 Rev. 01