Microtronics myDatalogEASYplus, Руководство пользователя

Страница: 123 / 139

Chapter 14 Troubleshooting and repair
14.2 Log entries and error codes
Log entry Parameter
Description
Code Plain text Code Plain text
1000 POWER ON 0 --- System start completed
> 0 --- Internal system error
Restart due to internal system error. There
may be a hardware problem if the "POWER
ON" log entry with a parameter code of >0 is
contained in the device log several times.
Contact the manufacturer in this case (see
"Contact information" on page 139).
1020 ERROR SOD ## --- Internal system error
There may be a hardware problem if this
error is contained in the device log several
times with the same parameter code.
Contact the manufacturer in this case (see
"Contact information" on page 139).
1030 UV LOCKOUT --- --- The device switches to energy saving mode
and terminates all of the operations as the
rechargeable battery or battery voltage is too
low. Only the charge controller, if present,
remains active.
1031 UV RECOVER --- --- The rechargeable battery or battery voltage
once again suffices to guarantee reliable
operation. This is either achieved by
replacing the rechargeable battery or battery
pack or by ensuring that the charge
controller has charged the battery
sufficiently. The device resumes normal
operation in accordance with the
configuration.
1033 MODEM_UPDATE ## --- Update of the firmware for the modem
controller was completed successfully.
This entry is always duplicated in the device
log. In the first entry, the parameter specifies
the major version number (e.g. 3 for
03v011), while in the second entry it
specifies the minor version number (e.g. 11
for 03v011).
Rev. 06 123