Microtronics myDatalogEASY IoTmini, Руководство пользователя, Страница: 73 / 210

Chapter 9 User interfaces
9.2.1.3 Control
Note: This configuration section is not visible if this site was created based on an IoT application (see
"myDatanet Server Manual " 805002).
Device logic
type Off Device logic deactivated
Pawn Activates device logic processing and informs the
myDatalogEASY IoTmini that the device logic is a "Pawn script".
Device logic
source Pawn source
code Device logic Input window for editing the device logic that is loaded into
the myDatalogEASY IoTmini (see "Device Logic (Pawn)"
on page 83)
Upload a
compiled script File upload Selection of the device logic binary file (*.amx) that is
uploaded to the myDatanet server and is loaded into the
myDatalogEASY IoTmini during the next connection. The
file path is only displayed as long as the input screen for
configuring the site has not been closed.
Data descriptor Input window for configuring the Data Descriptor (see "Data Descriptor " on page 185)
9.2.1.4 Configuration 0 - Configuration 9
Note: These configuration sections are only visible if the logical structure of the corresponding configuration
data block was defined using the Data Descriptor (see "Data Descriptor " on page 185). The name of the
configuration section is also defined via the Data Descriptor .
These configuration sections ensure that the parameters from the customer's freely definable, independent
memory blocks can be edited and displayed via the interface of the myDatanet server. For this purpose, the
logical structure of the configuration data blocks must be defined with the help of the Data Descriptor (see
"Data Descriptor " on page 185).
Rev. 01 73