Microtronics myDatalogEASY IoTmini, Руководство пользователя, Страница: 36 / 210

6.3 Storage
The following storage conditions must be observed:
myDatalogEASY IoTmini Storage temperature -30...+85°C
Humidity 15...90%rH
PSU713 BP
(300526)
Operating temperature -20...+50°C
Storage temperature +20...+25°C
AP
(300524)
Operating temperature -20...+60°C
Charging temperature -20...+60°C
Storage temperature 0... +30°C
PSU413D AP
(300525)
Operating temperature -20...+60°C
Charging temperature 0...+40°C
Storage temperature 0...+35°C
Note: The table above only contains the storage conditions for the energy sources used most frequently for the
myDatalogEASY IoTmini . Please consult the appropriate factsheet for information about the storage
conditions of other power supply units.
Note: If a Li-Ion rechargeable battery is to be stored for a longer period, it is recommended to ensure
that the charge level is 40% to 60% of the maximum charge.
Important note: Remove the power supply unit from the myDatalogEASY IoTmini prior to storage.
Store the measurement technology so that it is protected against corrosive or organic solvent vapours,
radioactive emissions as well as strong electromagnetic radiation.
6.4 Transport
Protect the myDatalogEASY IoTmini against heavy shocks, bumps, impacts or vibrations. The original
packaging must always be used for transport.
6.4.1 Transporting power supply units
WARNING:
With the exception of the PSU DC (300529), the power supply units required to operate the
myDatalogEASY IoTmini are classified as hazardous goods due to the installed
rechargeable batteries or battery packs for which the following conditions must be
observed during transport.
The guidelines that must be observed when transporting hazardous goods are dependent on the selected
transport route and are designed as follows:
l
Transport by road: ADR Directive
l
Transport by air: IATA guideline
l
Transport by rail: RID guideline
l
Transport by ship: IMDG guideline
36 Rev. 01