Microtronics myDatalogEASY IoTmini, Руководство пользователя, Страница: 31 / 210

Chapter 5 Functional principle
5.3 Memory organisation
Organisation of the myDatalogEASY IoTmini memory
1)
This memory block is only available if it was initialised via the "rM2M_RegInit()" function.
The size of the PAWN binary must not exceed 256kB for the transmission to the myDatalogEASY IoTmini . If
necessary, the data area of the PAWN binary can be compressed using a compiler instruction (#pragma
amxcompress <0-3>). The PAWN binary (256kB ), 10 configuration blocks (4000 Byte each), 4 registration
memory blocks (1kB each) and measurement data (3MB ) are stored in the flash memory of the
myDatalogEASY IoTmini . To execute via the PAWN script engine, the data area of the PAWN binary is
decompressed, if necessary, and copied to the RAM. The maximum size for the decompressed data area of
the PAWN binary in the RAM is 64kB . The optional registration memory blocks (e.g. REG_APP_STATE)
which can be initialized via the "RM2M_RegInit ()" function are also stored in RAM.
Rev. 01 31