Microtronics myDatalogEASY IoTmini, Руководство пользователя, Страница: 23 / 210

Chapter 4 General specifications
can optionally be initialised via the "rM2M_RegInit()" function and that is saved in the RAM. Its size can be
specified during initialisation, although it is limited to a maximum of 1kB . The registration memory blocks are
assigned to predefined purposes and are designed for storing device-specific data (see "Registration
memory blocks" on page 32).
Recorded measurement data can be sent to a central myDatanet server via LoRaWAN
5)
for further
processing.
Synchronisation of the configuration and registration data with the server, however, is only possible via the
USB connection .
1)
The universal inputs 3 and 4 are only available if the RS485 interface is not used.
2)
In order for the external temperature sensor to be used, the chargeable feature "Activation code temperature
input(300542)" must be unlocked or order option "Feature activation temperature input (300732)" is required.
3)
In order for the RS232 interface to be used, the chargeable feature "Activation code RS232 (300541)" must be unlocked
or order option "Feature activation RS232 (300731)" is required.
4)
In order for the RS485 interface to be used, the chargeable feature "Activation code RS485 (300540)" must be unlocked
or order option "Feature activation RS485 (300730)" is required.
5)
In order to transfer the data via LoRaWANthe order option "Feature activation LoRa (300971)" is required.
4.8 Device labelling
The specifications in this user manual apply exclusively to the myDatalogEASY IoTmini device type. The type
plates are located on the right side of the device and contain the following specifications:
l
Type designation
l
Item number
l
DevEUI of the LoRA module
1)
l
Specification of the product range
l
Serial number
l
Environmental conditions during operation
l
Protection class
l
Hardware revision
l
CE marking
l
Logo for the EU WEEE Directive
1)
Only in the case of order option "Feature activation LoRa (300971)"
The correct specification of the type designation and serial number is important for all queries and spare part
orders. Only then can we process requests promptly and properly.
Type plates myDatalogEASY IoTmini
Rev. 01 23