Microtronics BLE mA Link, Руководство пользователя, Страница: 21 / 46

Chapter 6 Storage, delivery and transport
Chapter 6 Storage, delivery and transport
6.1 Inspection of incoming deliveries
Check the shipment immediately upon receipt to ensure it is complete and intact. Immediately report any
discovered transport damages to the delivering carrier. Also notify Microtronics Engineering GmbHin writing
about this without delay. Report any incompleteness of the delivery to the responsible representative or
directly to the company headquarters of the manufacturer within two weeks (see "Contact information" on
page 45).
Note: Any claims received thereafter will not be accepted.
6.2 Scope of supply
The standard scope of delivery of the BLE mA Link (300870) includes:
l
BLE mA Link (300870)
Check additional accessories depending on the order and against the delivery slip.
6.3 Storage
The following storage conditions must be adhered to:
BLE mA Link Storage temperature -20...+50°C
Humidity 15...90%rH
Note: The battery remains in the BLE mA Link during storage.
Store the device so that it is protected against corrosive or organic solvent vapours, radioactive emissions as
well as strong electromagnetic radiation.
6.4 Transport
Protect the BLE mA Link against heavy shocks, bumps, impacts or vibrations. The original packaging must
always be used for transport.
6.5 Return
Every return must be accompanied by a fully field-out return form. This return form is available in the service
area of the myDatanet server. An RMA number is mandatory for any returns and can be obtained from the
Support & Service Centre (see "Contact information" on page 45). The return shipment of the BLE mA Link
must occur in the original packaging and with freight and insurance paid to Microtronics Engineering GmbH
(see "Contact information" on page 45). Insufficiently cleared return shipments will otherwise not be
accepted!
Rev. 01 21