Microtronics 300871, Руководство пользователя, Страница: 45 / 70

Chapter 10 DeviceConfig
10.1 General
The DeviceConfig configuration program can be downloaded free of charge from the following website:
www.microtronics.com/deviceconfig
The tool is used for configuration, maintenance, fault analysis and synchronisation purposes. It is compatible
with all myDatanet devices equipped with a USB interface, wireless M-bus interface or Bluetooth Low
Energy.
The requirements regarding configuration and maintenance vary depending on the type of device. To ensure
simple and intuitive operation, the user interface of the DeviceConfig therefore automatically adjusts to the
relevant device that is connected. In addition to the standard functions, the tool also supports device-specific
processes (e.g. calibration, zero point adjustment).
The DeviceConfig enables you to complete the following tasks:
l
Synchronisation of measurement data and configuration between device and server (specifically for
devices without GSM/GPRS modem)
l
Basic configuration of the device (e.g. measurement and transmission cycle)
l
Read out and analysis of the device log
l
Calibration, trimming and zero point adjustment (special knowledge and password required)
l
Update the firmware
10.2 Prerequisites
Interfaces 1 x USB
Operating system Win XP
Windows Vista
Windows 7
Windows 8
Internet connection Recommended
Required disk space approx. 50 MB
Rev. 02 45