Microtronics 300871, Руководство пользователя, Страница: 41 / 70

Chapter 9 User interfaces
9.2.2 Measurement channels
9.2.2.1 Basis
"Measurement channels – Basis" configuration section
1 Freely selectable channel title for the input
2 Drop down list to select the mode for the measurement channel
Off Measurement channel deactivated
automatic The BLE Gauge , that was already linked to the measurement channel of the data logger
during production, is used to acquire the measurement value.
manual The serial number of the BLE Gauge , that is to be used for the measurement value
acquisition, must be entered in the corresponding input field.
3 Serial number of the BLE Gauge that should be used for the measurement value acquisition. Read Only
if "automatic" mode has been selected.
4 Provided to adjust the zero point (see "Additional explanation on the zero point adjustment and
installation height of the pressure sensor" on page 42)
5 Specifies the installation height of the sensor (see "Additional explanation on the zero point adjustment
and installation height of the pressure sensor" on page 42)
6 String that is used as a measurement unit by all of the server display elements (Read Only)
7 Number of decimal places that are used by all of the server display elements
Rev. 02 41