Microtrol Black Pear TXIO, Инструкция по установке и эксплуатации

Страница: 6 / 12

4
3.1 Power Supply
The TXIO requires a 100-240v AC supply and has a consumption not exceeding 2VA. The
internal fuse is rated T630mA.
THIS EQUIPMENT MUST BE EARTHED
3.2 HVAC Communications Network ( TCC-LINK )
Can be connected to either U1/U2 or U3/U4 networks.
These are non-polarized.
Do not connect to the remote controller network.
3.3 Relay Output
The relay output is rated at 230V 1A. Normally-open and normally-closed terminals are
provided.
3.4 Error Input
This input accepts a volt-free contact. The polarity of the ‘active’ state is selectable via a
shorting link. See section 4.2.
3.5 Thermistor Input
Connecting a 10K301 thermistor to this input allows a temperature to be monitored by the
central controller or BMS interface.