Charge your portable charger
The built-in battery has been partially charged at the factory, but you may need to recharge
it before you can use your portable charger.
Charge your portable charger in the correct temperature: 0°C – +45°C. If the temperature is
outside this range, all the indicator lights blink fast, and your portable charger stops charging.
1. Plug a compatible USB charger (sold separately) into a wall outlet, or connect the USB end
of the cable CA-189CD to a computer.
2. Connect the micro-USB end of the cable CA-189CD to the charger connector of your
portable charger.
The indicator lights switch on and 1 indicator light blinks steadily while the battery is charging,
showing you the progress. When the battery is fully charged, all the indicator lights switch on
for 10 seconds.
3. When the battery is full, disconnect the USB charger from your portable charger, then from
the wall outlet. Your charger shows you the remaining battery level for 10 seconds.
Check the battery level
Press the power indicator key. The indicator lights switch on for 10 seconds, showing you the
remaining battery level.
If the battery is empty, the first indicator light blinks fast. Charge your portable charger.
© 2014 Microsoft Mobile. All rights reserved.
6