Microsemi SyncSystem 4380A Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 90

background image

DOC 4380A

4380A O & M Manual

24

098-00723-000

– Jul 2017 Revision 4.0

SyncSystem 4380A O&M Manual

[power] enabled
[type] 4393A
[OK] 2015-08-05T16:53:04Z

2.5.14 4383A IRIG Input Card

This module has four input ports that can be used to recover time from an IRIG time source. Ports 1 and 2
support DC IRIG (Default B007) and Ports 3 and 4 support AM IRIG (Default B127). By default Port #1
is active, to select another source or IRIG format, use the

irig_input

command. If the IRIG Source does not

provide the year as part of the time code message, (i.e. B000/B120), the user can specify the year with the
command.

4380A>irig_input [slot#] [port#] [irig type] <year>

To verify the system settings, use settings hardware:slots:N where N = the slot # where the card is installed.

4380>settings hardware:slots:6

[4383]
[port]
[1]

            [enabled] true
            [format] B007
   [2]

      [enabled] false
      [format] B007
   [3]

      [enabled] false
      [format] B127
   [4]

[enabled] false
[format] B127

To verify the card is working properly, use the

status hardware:outputs:slots:N

command (N=Slot #) to

obtain the current status for a particular card. The selected IRIG Source will report as good, the other ports
will show as disabled.

4380>status hardware:outputs:slots:6

[ports]
[1]

         [status] good
  [2]
   [status] disabled

  [3]
   [status] disabled
  [4]

   [status] disabled
   [power] enabled
   [type] 4383A

[OK] 2015-02-03T18:09:24Z

2.6

Antenna Delay Calibration

Utilizing  the  4380A  as  a  precise  time  recovery  system  requires  a  complete  calibration  of  the  4380A  and
distribution system.  Cables and distribution equipment external to the  4380A affect the calibration of the
overall  system  and  will  result  in  an  offset  from  UTC(USNO).    This  section  assumes  the  on-time-point
(OTP) of the system is the rear panel outputs on the 4380A.  This may not be the desired location for the
OTP; users should refer to section 2.7  for information on changing the location of the OTP for the system.

For applications requiring the highest level of accuracy, the 4380A should be calibrated at Microsemi.  This
process  involves  installing  the  user’s  antenna  and  antenna  cable  at  the  factory  and  comparing  the  PPS
outputs  to  a  system  which  has  a  known  offset  to  UTC(USNO).    Once  the  calibration  is  complete,  the
antenna delay  value  is  provided to the customer  when  the  unit is delivered to the  user.    The PPS outputs
will  be  accurate  to  the  precise  calibration  levels  specified  in  Appendix  A  as  long  as  the  user  installs  the
antenna at a surveyed location.  If a surveyed antenna location is not available, the  4380A can be used to
survey the location.  See Section 2.4.5 on determining the antenna position.

«
...
30
31
32
33
34
...
»

Содержание SyncSystem 4380A



























































































Отзывы:

Нет отзывов

Похожие инструкции для SyncSystem 4380A

Бренд: H3C Страницы: 1057

Бренд: Ebyte Страницы: 8

Бренд: JCG Страницы: 2

grandMA2 Series

Бренд: MA lighting Страницы: 36

Бренд: Paradyne Страницы: 2

Бренд: Paradyne Страницы: 20

Бренд: Paradyne Страницы: 2

Бренд: Zhone Страницы: 2

InterReach Fusion ADCP-77-044

Бренд: TE Connectivity Страницы: 236

Бренд: CSS Страницы: 2

Бренд: Idis Страницы: 31

Бренд: Patton electronics Страницы: 65

FRDM-STBC-SA9500

Бренд: Freescale Semiconductor Страницы: 2

Бренд: A4Tech Страницы: 8

RocketCache 3240X8

Бренд: HighPoint Страницы: 17

UM10301 PCA8565

Бренд: NXP Semiconductors Страницы: 54

Бренд: ICP DAS USA Страницы: 8

Бренд: Penguin Edge Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды