SyncServer S80 NTP User Guide
098-00777-000 Rev. A
41
show license
Use this command to display the current feature-level licenses.
Command Syntax:
show license
Level:
Config and Admin
Example:
S80>show license
Response:
ntp-packets-capacity-500, NTP with capacity of 500 packets
per second
If no license is installed, the S80 unit shows NTP packet capacity of 500 (default).
If the NTP license is installed, the S80 will indicate NTP packet capacity of 1000.
set license
Use this command to enter the 40-character license key for new features, and to delete features. The
license is associated with the serial number of the system.
Command Syntax:
•
To enter a license key for new features:
set license add <40-character license key>
•
To delete a license key:
set license delete
The S80 will respond with all installed features that can be deleted.
Level:
Admin
Example 1:
To add a license with the 40-digit key
1234567890abcdefghij09875654321klmnopqrst
:
S80>set license add 1234567890abcdefghij09875654321klmnopqrst
Note:
After three unsuccessful attempts user can't add license for a block out period of 15mins. So, in that
block out period even the valid license will not be accepted. After 15 min. user can add valid license
successfully.
show lldp
This command displays the current LLDP state. When the LLDP state is enabled, LLDP frames are sent
out by S80 every minute and no frames are sent out when the state is disabled. Any computer connected
in LAN or back-to-back can know the details of S80 by capturing the LLDP frames sent by S80. The
LLDP frames sent by S80 consists information about Management port IP address, MAC address,
System name, System description, and Ethernet port number. This feature, which is enabled by default,
provides a way for the user to discover the management port IP address of the unit as there is no serial
port connection available. See
for an example of a LLDP frame.
Command Syntax:
show lldp config
Level
User, Config, and Admin
Example:
S80> show lldp config
Содержание SyncServer S80
