manualshive.com logo in svg

Microsemi SmartFusion2 MSS, Руководство пользователя

Микросхема SmartFusion2 MSS от Microsemi предлагает широкие возможности для пользователей. Чтобы узнать больше о продукте и его настройках, скачайте бесплатное Руководство по эксплуатации на {сайт}. Это руководство поможет вам максимально использовать потенциал данного устройства.

Поделиться
Скачать
background image

Ethernet MAC

UG0331 User Guide Revision 15.0

382

11.4.1

Transmit Operation

1.

Before any packet can be transmitted, a group of Tx descriptors needs to be set up to define the ring 
buffer used for transmit operations.
The start addresses set for the different segments of the ring buffer are required to be word aligned 
and should be spaced to give segments of equal size, each able to handle a packet of the maximum 
size to be transferred.
The packet size component of transmit descriptors should initially be written to have ‘1’ in bit 31, 
which is the empty flag to indicate that the ring buffer does not currently contain any valid data.

2.

The least significant four bits of the DMA interrupt mask register are set to specify which Tx DMA 
events cause a DMA interrupt to be generated.

3.

The data for one or more transmit packets should then be placed in contiguous segments of the ring 
buffer. The PacketSize component of the descriptor associated with these segments amended both 
to record the size of the packet placed in the buffer and to set the Empty Flag to ‘0’ to indicate the 
presence of valid data.

4.

The location of the descriptor, which acts as the entry point in the Tx ring buffer, is written in the DMA 
Tx descriptor register.The DMA transfer of the transmit packets are enabled by writing a ‘1’ to the bit 
0 of the DMA Tx control register, which is Tx enable bit.

5.

The built-in DMA controller then reads the DMA Tx descriptor register to discover the location of the 
first Tx descriptor. The Tx descriptor is read to check the validity of the associated packet which is 
indicated by the empty flag, the start address of the packet to be transmitted, and its size.
If the empty flag is ‘1’ then the descriptor is not associated with valid data. The DMA controller termi-
nates the sequence of transmit packet transfers, set the TxUnderrun bit in the DMA Tx Status regis-
ter and clear the TxEnable bit in the DMA Tx Control register. The TxUnderrun bit in the DMA Tx 
Status register is set whenever DMA controller reads a ‘1’ in the empty flag of the Tx Descriptor 
being processed.

[20:16]

FTPP Overrides

0x0

The 5-bit field containing the FIFO transmit per-packet 
override flags signaled to the A-MCXFIFO during the packet 
transmission. The bits are encoded as follows:
20: FIFO transmit control frame flag.
19:18: FIFO transmit per-packet pad mode flag.
0x0: Do not pad transmit frame.
0x1: Pad all frames to 64 bytes and append FCS to all frames.
0x2: Reserved.
0x3: Reserved.
17: FIFO transmit per-packet generate FCS flag.
16: FIFO transmit per-packet enable flag.

[15:12]

Reserved

0x0

Reserved.

[11:0]

PacketSize

0x0

For the transmit operations, the 12-bit field gives the size of 
packet to be transferred in bytes. 
In the receive operations, the DMA controller writes the 
number of bytes received to this field.
The value of this field prior to the transfer being made is 
ignored.

Table 326 • 

Next Descriptor

Bit Number Name

Reset Value

Description

[31:2]

Next Descriptor[31:2]

0x0

The built-in DMA controller reads this register to discover the 
location in the host memory of the descriptor for the next 
packet in the sequence. The descriptors should form a closed 
linked list.

[1:0]

Next Descriptor[1:0]

0x0

All descriptors are 32-bit aligned in the host memory.

Table 325 • 

Packet Size

 (continued)

Содержание SmartFusion2 MSS






























































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SmartFusion2 MSS

Ohsung Electronics B905-FTN-TA User Manual preview
B905-FTN-TA
Бренд: Ohsung Electronics Страницы: 18
C.Nord GSM Operation Manual preview
GSM
Бренд: C.Nord Страницы: 100
3Com CoreBuilder 9000 Getting Started Manual preview
CoreBuilder 9000
Бренд: 3Com Страницы: 78
Bang & Olufsen BeoSystem 4 How To Use Manual preview
BeoSystem 4
Бренд: Bang & Olufsen Страницы: 36
Mad Catz DVD 2 Owner'S Manual preview
DVD 2
Бренд: Mad Catz Страницы: 4
York MILLENNIUM Manual preview
MILLENNIUM
Бренд: York Страницы: 20
Taco Electronic Solutions iWorx MPU2 Installation Manual preview
iWorx MPU2
Бренд: Taco Electronic Solutions Страницы: 28
AAF MicroTech II UV05 Operation & Maintenance Manual preview
MicroTech II UV05
Бренд: AAF Страницы: 50
Taconova NOVASTAT EL DIGITAL Manual preview
NOVASTAT EL DIGITAL
Бренд: Taconova Страницы: 7
V2 WES-EASY Manual preview
WES-EASY
Бренд: V2 Страницы: 48
Tamiya TLU-02 Quick Start Manual preview
TLU-02
Бренд: Tamiya Страницы: 5
TUYA WBR3L Datasheet preview
WBR3L
Бренд: TUYA Страницы: 28
Toptech MultiLoad II EXL Installation Manual preview
MultiLoad II EXL
Бренд: Toptech Страницы: 83
Winbond W77E516 Manual preview
W77E516
Бренд: Winbond Страницы: 85
LOGICDATA DYNAMIC MOTION Configuration Handbook preview
DYNAMIC MOTION
Бренд: LOGICDATA Страницы: 23
Xilinx ML410 User Manual preview
ML410
Бренд: Xilinx Страницы: 101
Burkert 6213 EV Operating Instructions Manual preview
6213 EV
Бренд: Burkert Страницы: 21
GFI Kerio Control Box NG510 Quick Start Manual preview
Kerio Control Box NG510
Бренд: GFI Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды