3
SmartFusion Development Kit Quickstart Card
Running the Manufacturing Test
You can run the manufacturing test to verify the device and board connections. The manufacturing
test files are available from the SmartFusion Development Kit page. Instructions on how to run the
test are available in the
SmartFusion Development Kit User’s Guide
.
JP31
JP20
JP1, JP2
DirectC Header (J13)
Board Reset Switch
Power Jack
Memory Device
Configuration Headers
(JP17, JP19)
AGLP DIP Switch
IGLOO PLUS Header
10/100 Ethernet PHY
JP30
RJ45 Connector for
10/100 Ethernet
Power Switch
DACOUT/
ADC Headers
(JP4)
RJ45 Connectors for
EtherCAT Ports
SmartFusion
Device
DB9
Connector
for CAN0
DB9
Connector
for CAN1
A2F500
Connector
JP28
JP13
J32
JP18
JP22, JP23
JP16
JP24
LCPS Connector
DIP Switch
JTAG_SEL Switch
JP11, JP12
JP7
JTAG Chain
Configuration
Header (JP5)
1.5 V Header (JP6)
PUB Switch
DB9 Connector for RS485 (UART1)
JP14, JP15, JP21, JP27
SPI Headers
(JP8)
I
2
C Headers (J7)
USB Connector for UART0
OLED
Push-Button Switches
RealView
®
Header
DAC0 and
DAC1 Callibration
POTs for ±15 V
Bipolar Outputs
POT for
Current Monitor
Mixed
Signal
Header