Power Over Ethernet Power View Pro User Guide
Copyright
2013
Microsemi
22
Rev.1.0, 17-Dec-13
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Phone (USA): (800) 713-4113, (ROW): (949) 221-7100 Fax: (949) 756-0308
Figure 3-13: Automatic Weekly Schedule PoE Port Reset
Automatic Weekly Schedule PoE Port Reset
– main features:
Flexibility on the days that PoE port reset should be done (multiple day combination).
30-minute duration resolution, starting from 30 minutes up to 24 hours.
One or more PoE ports can be re-initialized.
NOTE:
For Automatic Weekly Schedule PoE Port Reset to function properly, an NTP Server must be
configured (see Configuration Web Page) providing correct GMT time.
Please make sure that a green
OK
appears to the right of the unit local time
3.4.3 Advanced Web Page
– Reset Unit Options
The unit supports three different reset options (also available over Telnet)
Figure 3-14: Reset Unit Options
Reset Manager
– Reset only the internal network manager responsible for unit network management
interfaces such as Web, Telnet, SNMP, etc. Internal Ethernet switch will be also reset (network will be
down for a few seconds) leaving PoE power unchanged (powered PD devices will continue normal
operation as if no reset was done).
