Chapter 3
Serial Configuration
3-24
MS-850 Raster Scanner User’s Manual
3–Ser
ial
Conf
ig.
Diagnostics
Warning Messages Status
Format: <
K”
status,laserhi,laserlo,novram message
>
Example: To enable Diagnostics and disable laserhi, send <K”1,0>.
Laser Current
You can set messages for high and low current thresholds.
High Laser Current
Format: <
K;
message
>
Example: To change the message to HI-CURR, send <K;HI-CURR>.
Low Laser Current
Format: <
K:
message
>
Example: To change the message to LO-CURR<K:LO-CURR>.
Operating Temperature
High Temperature Threshold (deg. C)
Format: <
K+
degrees,message
>
Example: To change the temperature to 45 and message to MAX-TMP,
send <K+,MAX-TMP>.
status:
laserhi:
laserlo:
novram corrupt warning:
0 = Disabled
1 = Enabled
0 = Disabled
1 = Enabled
0 = Disabled
1 = Enabled
0 = Disabled
1 = Enabled
message:
Any 1 to 7 character ASCII string except NUL, <, or >.
Default is
HI-LASR
.
message:
Any 1 to 7 character ASCII string except NUL, <, or >.
Default is
LO-LASR
.
degrees:
0 to 50, zero disables.
default is
50
message:
Any 1 to 7 character ASCII string except NUL, <, or >.
Default is
HI-TEMP
.