Interface
MS-850 Raster Scanner User’s Manual
4-15
4–Ut
ili
ties
Motor Off
Clicking
Motor Off
or sending serial command
<KF>
turns the spinning mirror
motor off. This command is useful for long idle periods.
Associated serial command:
<KF>
Output-1
Clicking
Output #1
activates the output between pins 6 and 20 of the 25-pin host
connector (regardless of Master Label or Output-1 Driver status).
Associated serial command:
<L1>
Output-2
Clicking
Output #2
activates the output between pins 8 and 21 of the 25-pin host
connector (regardless of Master Label or Output-2 Driver status).
Associated serial command:
<L2>
Output-3
Clicking
Output #3
activates the output between pins 15 and 22 of the 25-pin host
connector (regardless of Master Label or Output-3 Driver status).
Associated serial command:
<L3>