Microscan MS-810, Руководство пользователя

Страница: 61 / 144

Setup Menu
MS-810 Industrial Scanner User’s Manual
2-39
2–Menu C
o
n
fig
.
Setup Menu
The Setup menu allows you to set specific bar code scanning parameters that affect
decode rate, and if equipped with the MS-sensor, allows you to determine why the
scanner did not decode a specific label within the triggered read cycle.
Figure 2-10 Setup Menu Structure
Default
Clicking the DEFAULT button will reset all parameters on the current menu to
defaults. This does not take effect until it is saved to the scanner with the SEND/NO
SAVE or SEND/SAVE buttons.
Note: Unlike most configuration settings Scanner Type, Scans per Second, and Gain
Adjustment are not saved for power-on (but are initialized) when you press Y. To save
new settings to NOVRAM for these parameters, enter the
<Zp> command. See “Save
Scanner Type, SPS, and Gain for Power-on” on “Save Scanner Type, SPS, and Gain
for Power-on,” on page 4-12 .