Microscan MS-810, Руководство пользователя

Страница: 19 / 144

MS-810 Industrial Scanner User’s Manual
1-9
1–Qui
ck S
tart
Step 8 Test Decode Rate with Static Label
a) Position the label in front of a functioning scanner, click on the Utilities button,
and in the Read Rate dialog either click the Percent or Decodes/Sec radio but-
ton and click Start , or enter the <Cp> or <C> command from the host terminal
to launch test.
b) Observe rate. (The percent or decode rate is added to the front of the data
string.)
c) End the test by clicking the Stop button or the <J> command.
Note
:
If, after making adjustments, you have changed the read range or another
parameter used in the number of scans formula, you should recalculate the number
of scans (see
“Number of Scans” on page A-18 ).
Note: Variations between labels are common. For this reason, the greater number
of sample labels you test, the more likely you are to achieve optimum decode rates.